too large or curved for the flatbed printers. Hybrid’s head of marketing, Duncan Jefferies, likens the current state of UV DTF to the role of UV desktop printers in around 2004, which were taken up by users from high-end screen-printing backgrounds who could see the flexibility that a ‘oneoff’ printer could provide. He predicts that “the applications will explode” as market take-up accelerates. Transfer Window When the transfers are peeled off the film, the glue layer comes with the cured ink, providing a sticky backing to adhere to the surface. Simple finger pressure is sufficient to stick them in place, and the B film is peeled off after placing. The stickers can be fitted snugly onto irregularly curved convex or concave surfaces or around the inside of toroidal or doughnut-shaped items. The resulting bond is strong enough to survive dishwashing on items like mugs (though Hybrid says this doesn’t necessarily apply on glass). It’s also hard to remove via abrasion or picking at the edges, though no specific claims are made for long-term durability. One suggested application is decoration/branding of beer pump clips for specific events or short-term promotions, though given the tenacity of the transfer, the entire item would have to be replaced after use. The software supplied with the printer is Mimaki’s RasterLink 7 RIP, which includes Simple Create for graphic design, and Job Creator for setting up the layers necessary for creating the white backing, and clear varnish so that artwork does not have to be specifically pre-prepared for this. Mimaki’s ID Cut software can facilitate automation of cutting out of finished products if a Mimaki cutting plotter is also available. Mimaki doesn’t quote productivity figures and an informal visual inspection of the printer in operation at the trade show suggested a figure in the low single digits in terms of square metres per hour. However, the products being produced are typically small and potentially offer a high margin, especially if sold in a B2C ecommerce context, where the novelty value of personalised one-off stickers should enable decent prices to be obtained. One downside is the sustainability aspect in that neither the lining nor the A and B films are currently recyclable, though Hybrid has long offered a ink cartridge/bottle collection facility to its customers. As the products are small, total production volumes are likely to be small too, especially compared to typical wide-format products, so this is at least mitigated to some extent, and recycling routes may yet be found if enough material is generated. Hybrid expects that there will be many more applications than those it and Mimaki have thought of. According to Jefferies: “Customers will drive it. User sites will likely be already into product decoration; this lets them offer extra capabilities or meet unserved needs of their customers.” One major benefit compared to conventional label or sticker solutions is that only the printed design is transferred to the final surface, without any margin or infilled spaces that have to be manually weeded UNDER THE HOOD | MIMAKI UJV300DTF-75 UV Print Type: UV LED-cured direct-to-film pressure transfer Print Resolution: 300 to 1200dpi Ink Set: CMYK plus white and clear, Greenguard Gold certified Software: Mimaki Raster Link 7 and Simple Create Statistics ▲ Stickers from the press can be fitted onto irregularly curved surfaces ◄ The ‘kebab’ cylinder printer option allows for applications on different types of cylindrical shapes 24 email: editor@printmonthly.co.uk Issue 360 - May | June 2026
RkJQdWJsaXNoZXIy MjM0NDIxOA==